Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear bumper of the Ram 2500?

Model: RAM 2500 DJ, MK 4, D2, DS - Years 2009-2019
Part: Rear bumper

In order to replace the rear bumper of the Ram 2500 you have to go to the lower part of the car, so that you can unscrew the screws that secure the bumper from the inside. Once these screws have been removed, it will be possible to unscrew the screws that secure the bumper in the central part, immediately below the license plate housing. When these screws have also been removed, it will be possible to completely detach the bumper, which will have to be replaced with a new one. This will have to be positioned in its seat and fixed with screws.

Posted on 21 October 2022 by ScegliAuto

Video tutorial

Related tutorials

Ram 2500 Rear Bumper Disassembly (2020)
Ram 2500 Rear Bumper Disassembly (2020)
RAM 2500 (2019-2026 / DT, MK 5) In today's video we will see the step-by-step instructions for disassembling the rear bumper of the Ram 2500 fifth series, from 2020. First of all, w…
How to replace the rear logo on the Ram 2500
How to replace the rear logo on the Ram 2500
RAM 2500 (2019-2026 / DT, MK 5) In this video we see how to replace the rear logo of the Ram 2500, the pickup of the Stellantis group. As it is not screwed, the old logo must be det…
How to disassemble the rear light in RAM 2500?
How to disassemble the rear light in RAM 2500?
RAM 2500 (2009-2019 / DJ, MK 4, D2, DS) In this tutorial we can see how to disassemble the rear light in the RAM 2500 pick-up, a very simple and fast operation, to be carried out when repla…

Other guides you may be interested in

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos