Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light on a Dodge Ram 1500

Model: RAM 1500 MK 2, BR, BE - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Tail light bulb

See other generations:
Video tutorial

If you need to replace the bulb of the third brake light on this vehicle, you will find instructions on how to proceed in this description, and you can also refer to the images in the video. First, gather a screwdriver to unscrew the support screws of the light assembly.

Then, remove the assembly by pulling it towards you to access the rear lights, allowing you to proceed with their replacement by disconnecting the individual connectors. Insert the new bulb, reconnect the connector, and finally reposition the light assembly and secure the support screws.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light on a Dodge Ram
How to Replace the Third Brake Light on a Dodge Ram
RAM 1500 (2009-2019 / DS, DJ, MK 4) To change the bulb of the third brake light on a Dodge Ram, start by removing the 4 screws that hold the light panel in place. Lift the panel from th…
How to Change the Bulb on a Dodge RAM 1500
How to Change the Bulb on a Dodge RAM 1500
RAM 1500 (2009-2019 / DS, DJ, MK 4) Let's see how to replace the bulbs on a Dodge RAM 1500. Remember, you need to remove the entire headlight assembly, so open the tailgate and unscrew …
Replace Brake Pads on a 2015 Dodge Ram 1500
Replace Brake Pads on a 2015 Dodge Ram 1500
RAM 1500 (2009-2019 / DS, DJ, MK 4) In this tutorial video, you will see how to replace the brake pads on a 2015 Dodge Ram 1500. Start by lifting the vehicle and removing the wheel. Now…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos