Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Mirror Bulb on a Ram Promaster?

Model: RAM Promaster MK 1 - Years 2014-2022
Part: Light bulb

To replace the bulb in the exterior rearview mirror of a Ram Promaster, pry under the mirror glass to detach it from its housing. After removing the piece, unscrew the screws underneath to detach the light assembly containing the bulb. Disconnect the old bulb from its connector and replace it with a new one; after the replacement, reconnect the new bulb, insert it into the housing, and secure it with the screws that were removed earlier.

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

RAM Promaster (2014-2022 / MK 1) To replace the side mirror on your Ram ProMaster, remove the plastic cover on the door that surrounds the front glass. Under this cover, you will fin…
RAM Promaster (2014-2022 / MK 1) In this video tutorial, you will learn how to remove and replace the outside rearview mirror of the RAM Promaster, following the instructions below. …
RAM Promaster (2014-2022 / MK 1) In this video tutorial, you will see the steps to disassemble and replace the headlight bulb and housing on the RAM Promaster. First, open the hood o…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos