Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. RAM
  4. :
  5. 2500
  6. : How to add or replace the cabin filter in the RAM 2500 pick-up?

RAM 2500 - Video tutorial

Model: RAM 2500 MK 4, DS, DJ, D2 - Years 2009-2019
Part: Cabin air filter
Operation: How to add or replace the cabin filter in the RAM 2500 pick-up?

In this tutorial, we can see how to add or replace the cabin filter in the RAM 2500 pick-up, a very simple operation. First of all, we position ourselves on the passenger seat, then we open the glove compartment and disconnect the end-of-travel cord on the right. Then, we press both walls of the drawer inward, detach the drawer from the dashboard and locate the long rectangular door behind which the filter is positioned. If it has never been added, we will have to cut the housing panel along the entire perimeter, as shown. Once the filter is inserted, we also position the appropriate door to be purchased separately.


Posted on 23 June 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos