Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bed Cover on a Dodge Ram

Model: RAM 2500 D2, MK 4, DS, DJ - Years 2009-2019
Part: Body

Do you want to replace the top access cover on your large Dodge pickup? Let's go through the disassembly process together. First, use a screwdriver or a trim tool to remove the plastic rivets around the bed cover as shown in the video. Then, detach it from the access door of the bed using your hands. Now, proceed with installing the new piece: place the plastic cover on the edge of the bed and press down until the clips snap into the side sheet metal of the access door. Finally, secure it with the plastic rivets.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel pump of the Dodge RAM 2500.
How to replace the fuel pump of the Dodge RAM 2500.
RAM 2500 (2002-2009 / DM, DH, D1, DC, MK 3, DR) Today's procedure will illustrate how to disassemble and replace the fuel pump of the Dodge RAM 2500, following the instructions below. First, we lif…
Where are the fuses located in the Dodge Ram 2500?
Where are the fuses located in the Dodge Ram 2500?
RAM 2500 (2019-2026 / DT, MK 5) In the Dodge Ram 2500, the fuse box in the engine compartment is the only one in the vehicle. It is located between the vehicle's battery and the fro…
Replace the front turn signal bulbs on the Dodge Ram 2500
Replace the front turn signal bulbs on the Dodge Ram 2500
RAM 2500 (2019-2026 / DT, MK 5) In this video we will see how to remove and replace the front side turn signal bulbs of the Dodge Ram from 2019 onwards, in simple steps. First we ar…

How to Remove the Steering Wheel Airbag on a Dodge Journey

How to remove the steering wheel airbag on a Dodge Journey? Follow these steps. Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Remove the inspection caps from the back of the steering wheel, then unscrew the airbag retaining bolts with a socket wrench. Once the driver’s airbag is released, disconnect the power connectors and remove the airbag from the steering wheel. For reinstallation: connect the power connectors, then press the airbag back onto the steering wheel while simultaneously tightening the rear bolts.

Watch the video!


by ScegliAuto

More videos