Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. RAM
  4. :
  5. 2500
  6. : Where are the fuses located in the Dodge Ram 2500?

RAM 2500 - Video tutorial

Model: RAM 2500 DT, MK 5 - Years 2019-2024
Part: Fuse box
Operation: Where are the fuses located in the Dodge Ram 2500?

In the Dodge Ram 2500, the fuse box in the engine compartment is the only one in the vehicle. It is located between the vehicle's battery and the front grille. To access the fuses, we remove the cover by manipulating the side tabs. Once the cover is removed, to replace a fuse, we identify the fuse for the non-functioning component, grasp it with small pliers, and check if the bridge inside is broken. If the bridge is broken, the fuse needs to be replaced. If the bridge is intact, the fuse is functioning properly. Replace a fuse with one of the same amperage.


Posted on 24 September 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos