Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Instrument Cluster on the Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Instrument cluster

See other generations:
Video tutorial

Today, follow the main instructions to remove and replace the instrument cluster on the Renault Clio. First, get inside the vehicle and start by removing the plastic cover above the instrument cluster; then unscrew the fastening screws located on its sides, finally disconnecting the electrical wiring found at the back, as shown in the video.

At this point, replace and install the new instrument cluster if necessary, and reassemble the various plastic covers, following the video tutorial to the end!


Updated on 21 October 2026 by ScegliAuto


Related tutorials

How to disassemble the dashboard of the Renault Clio
How to disassemble the dashboard of the Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Below we will see the main instructions that will allow us to disassemble and remove the entire dashboard of the Renault Clio. First, we get into the…
How do you reset the tire pressure light on the Renault Clio?
How do you reset the tire pressure light on the Renault Clio?
Renault Clio (2019-2026 / Clio V, Clio 5) The tire pressure warning light shown on the instrument panel of the Renault Clio can be reset by inflating the tires until they reach the recommende…
How do you reset the Service light on the Renault Clio 4?
How do you reset the Service light on the Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) It will be possible to completely remove the Service light from the instrument panel of the Renault Clio 4 by inserting the ignition key and turning …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos