Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna on a Renault Clio

Model: Renault Clio Clio V, Clio 5 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Antenna

See other generations:
Video tutorial

Today, install the Shark antenna on a Renault Clio model 5. First, remove the screws on the side covers of the boot to access the vehicle's headlining. Carefully detach the clips and remove the nuts holding the headlining.

Next, take off the seal to access the antenna. Remove the nut securing the antenna, then take it off, disconnect the connector, and fit it onto the new antenna.

Refit the nut and reassemble the removed components.


Updated on 22 October 2026 by ScegliAuto


Related tutorials

How do you replace the antenna of the Renault Clio?
How do you replace the antenna of the Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the antenna of the Renault Clio, you need to grab the old one and rotate it counterclockwise to remove it from its housing. Once the old a…
How to replace the car radio antenna of the Renault Clio
How to replace the car radio antenna of the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Below we will see the instructions that will allow us to disassemble and replace the car radio antenna of the Renault Clio, in simple steps. First of…
Replace Antenna on Renault Clio
Replace Antenna on Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Let's see how to remove the antenna base on a Renault Clio. Remove the plastic cover from under the roof protective panel: detach the protective plas…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos