Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the side mouldings from the doors of the Renault Clio III

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Body

See other generations:
Video tutorial

In this video, we will see how to remove the side mouldings from the doors of the Renault Clio III. Start by spraying some cleaner on the mouldings; this will help in removing the various pieces, beginning with the side repeater lens. Simply push it upwards and it will come off quite easily: remove the transparent part and leave the bulb with its electrical connector.

Slide the badge plate towards the rear to remove it. Now open the front door and remove the plastic cover found near the moulding on the outermost part. From here, insert a screwdriver to remove the screw (be careful not to drop it inside) that holds the moulding; then slide it off and remove it. The rear part is secured by white clips.

You need to remove the rear speaker cover, then unscrew the speaker and disconnect the connector; from here, access the bodywork and remove the three clips mentioned earlier using pliers. Now it will be easy to remove the moulding from the outside.


Updated on 23 October 2026 by ScegliAuto


Related tutorials

Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this video, you can see how to manually lock a Renault Clio III when the remote doesn't work from the outside. In this case, you will be forced to…
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To remove the dashboard of the Renault Clio, unscrew the screws located at the back of the steering wheel so that the airbag at its centre can be ext…
Renault Clio (1998-2005 / MK 2, Clio 2) To remove the trims on the door, first locate the screw on the side edge of the door. Usually, the screw is protected by a rubber cap, and to remove …

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos