Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the gear lever in the Renault Scenic 2?

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Transmission

Although at first glance it may seem like a rather difficult job that requires many specific tools, in reality it is not at all, as it is a short-term intervention, clearly knowing where to put your hands. The whole process consists of first removing the gear shift knob, grabbing it with your hands and pulling it upwards, then removing the boot, which also does not require the use of any tools, as it is installed by interlocking, and finally moving the lever in the base of the first mentioned lever, acting with a small screwdriver, just as shown in the video, in order to release the lock, pull and extract it as well.

Posted on 18 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Gear Knob of the Renault Scenic
How to Change the Gear Knob of the Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Replacing the gear knob on this vehicle is very simple. First, pull the knob firmly towards you to detach it from the gear lever; once removed, be ca…
Replacing the Gear Knob on a Renault Scenic
Replacing the Gear Knob on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Today's guide will show you how to remove and replace the gear knob and gaiter on a Renault Scenic in simple and quick steps. First, get inside the v…
Where to Find the OBD Port on a 2011 Renault Scenic
Where to Find the OBD Port on a 2011 Renault Scenic
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) To locate the OBD port inside your 2011 Renault Scenic (third series) in just a few seconds, read the following guide and apply the various steps des…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos