Do it yourself
Frequently asked questions about cars and motorcycles

Where is the speed sensor located in the Renault Clio?

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Checks and maintenance

See other generations:
Video tutorial

This video shows where the speed sensor is located in the Renault Clio and how to proceed if you need to replace it, a very simple and quick operation. As shown, the sensor in question is positioned at the upper area of the gearbox, about halfway up on the front side of the engine.

Before replacing it, ensure the engine is sufficiently cool, then open the bonnet, locate it, and pull it out of the housing by lifting it upwards. Finally, disconnect the connector and install the replacement by following the reverse procedure.


Updated on 25 October 2026 by ScegliAuto


Related tutorials

Renault Clio (1998-2005 / MK 2, Clio 2) In this video, you can see where the speed sensor is located in the Renault Clio 2 and how to proceed if you need to replace it, a very simple and qu…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) When the vehicle struggles to start when cold, the main cause is the malfunction of the camshaft sensor, which needs to be replaced. The camshaft sen…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Disabling the speed limiter on the Renault Clio model IV is a really simple and quick operation to be carried out independently. The on/off button of…

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos