Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tire pressure on a Renault Clio 4

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Checks and maintenance

Thanks to this very short tutorial, we can see how to reset the tire pressure on a Renault Clio, fourth generation model in production from 2012 to 2019. So first of all, we need to turn on the car's ignition without starting the engine, then we start pressing the up arrow button, located at the end of the right steering wheel lever, until we see on the tachometer display the voice related to tire pressure. Once this is done, we press and hold the up arrow button again until the notification indicates that the new tire pressure has been set.

Posted on 21 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) Today we will see how to reset the tire pressure warning light (TPMS) of the Renault Clio; before performing the reset, it is necessary that all four…
Renault Clio (2019-2026 / Clio V, Clio 5) In this tutorial, we can see how to reset the tire pressure light in the Renault Clio, an extremely simple and quick operation, to be carried out onl…
Renault Clio (2019-2026 / Clio V, Clio 5) In this tutorial, we can see how to reset the tire pressure warning light in the Renault Clio, an extremely simple and quick operation, to be done on…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 1998-2005 - Where is the heater resistor located on the Renault Clio mk2? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer
    • Clio 2005-2013 - What to do if the Renault Clio horn does not work? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos