Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Renault Fluence?

Model: Renault Fluence MK 1 - Years 2009-2019
Part: Service warning light

Resetting the service in the Renault Fluence, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must have completed all scheduled maintenance work required. We start by going inside the cabin, then we turn on the instrument panel and, using the directional arrows on the right lever, we reach the "Service intervals" voice. We then enter the menu by holding down the up arrow, select the service to reset, and hold down the down arrow button to reset it.

Posted on 25 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the 2011 Renault Fluence?
How to Reset the Service Light on the 2011 Renault Fluence?
Renault Fluence (2009-2019 / MK 1) To reset the service light on the 2011 Renault Fluence, use the arrow buttons located at the end of the lever on the right side of the steering wheel…
How to reset the service light on the Renault Fluence?
How to reset the service light on the Renault Fluence?
Renault Fluence (2009-2019 / MK 1) In this tutorial we can see how to reset the service in the Renault Fluence, an extremely simple and quick operation, to be carried out only once all…
How to Reset Service on Renault Fluence?
How to Reset Service on Renault Fluence?
Renault Fluence (2009-2019 / MK 1) In this tutorial, see how to reset the service on a Renault Fluence, an extremely simple and quick operation, to be performed only after completing a…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos