Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin air filter of the Renault Megane III.

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Cabin air filter

In this video we see how to proceed with the replacement of the cabin air filter of the Renault Megane III. Let's position ourselves in the front passenger seat, with a plastic lever we remove the side panel of the dashboard near the door, we release the upper profile of the glove compartment, unscrew the three screws and remove the compartment by disconnecting the electrical connector. We remove the central tunnel panel, remove the tube that carries the air downwards, move the cables sideways and open the cover of the filter box, remove the old filter element and replace it with a new one and close the cover. We reassemble all the parts proceeding in reverse.

Posted on 26 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Renault Megane 3
How to replace the cabin air filter of the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) The cabin air filter of the Renault Megane model 3, produced from 2008 to 2015, is located inside the cabin; specifically behind the passenger side g…
How to change the cabin air filter on a Renault Megane III
How to change the cabin air filter on a Renault Megane III
Renault Megane (2008-2015 / Megane III, Megane 3) To change the cabin air filter on a Renault Megane III, access it from the passenger footwell. As seen in the video, there is a black plastic triangl…
Replacing the Cabin Air Filter on a Renault Mégane 3
Replacing the Cabin Air Filter on a Renault Mégane 3
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, learn how to remove and replace the cabin air filter on a Renault Mégane third generation by following these simple steps. First, loca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos