Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on a Renault Mégane 3

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

In this video, learn how to remove and replace the cabin air filter on a Renault Mégane third generation by following these simple steps. First, locate the air filter, which is found behind the glove compartment in the front passenger area; then remove the side plastic cover and, by opening the glove compartment, unscrew all the fixing screws to remove it. Once the glove compartment is removed, disconnect the electrical connector of the bulb and take off the filter cover by unscrewing its fixing screws: all that's left is to extract the old filter and replace it with the new one!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter on the Renault Megane 2
How to replace the cabin air filter on the Renault Megane 2
Renault Megane (2002-2010 / Megane 2) The cabin air filter on the Renault Megane mk2 model is located inside the cabin, specifically under the passenger side glove box. To replace the cab…
Replacing the Cabin Air Filter on a Renault Megane
Replacing the Cabin Air Filter on a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Today, we will look at the instructions that will allow us to replace the cabin air filter on a Renault Megane in simple steps. First, get inside the…
How to replace the cabin air filter of the Renault Megane 3
How to replace the cabin air filter of the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) The cabin air filter of the Renault Megane model 3, produced from 2008 to 2015, is located inside the cabin; specifically behind the passenger side g…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos