Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter of the Renault Megane 3

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Cabin air filter

The cabin air filter of the Renault Megane model 3, produced from 2008 to 2015, is located inside the cabin; specifically behind the passenger side glove box. Since the filter is located inside the dashboard, in order to replace it, you need to open the glove box and remove it using a flathead screwdriver to unhook the side parts of the glove box and remove the plastic pins. Once the glove box is removed, we remove the filter cover using a 20mm key to unscrew the pins, in order to replace it. We clean the filter housing and insert the new one, close the cover and reassemble the glove box.

Posted on 28 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in the Renault Megane 4
How to Replace the Cabin Air Filter in the Renault Megane 4
Renault Megane (2015-2023 / Megane 4, Megane IV) To replace the cabin air filter in your Renault Megane Mk4 (2015-2022), you only need a few minutes. Follow this guide to complete the task easily an…
How to replace the engine air filter of the Renault Megane 3
How to replace the engine air filter of the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) If the engine of your Renault Megane Mk3 often overheats even at low speeds, it is very likely that it is time to replace the air filter. In this new…
How to Replace the Air Filter on a Renault Megane 4
How to Replace the Air Filter on a Renault Megane 4
Renault Megane (2015-2023 / Megane 4, Megane IV) If the engine of your Renault Megane Mk4 is overheating unusually due to an old air filter, you need to replace it as soon as possible. Below, we wil…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos