|
Do it yourself
| |||
| ||||
How to Change the Cabin Filter on the Renault Megane III
Model: Renault Megane
Megane III, Megane 3
- Years:
2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Video tutorial
Let's see how to change the cabin air filter on a Renault Megane III. The operation is demonstrated on a right-hand drive vehicle, making it slightly more complicated than on a left-hand drive, as the clutch pedal must be removed. Remove the side panel of the centre tunnel and the lower dashboard panel under the steering wheel; you need to take off the air distribution duct, unclip the hydraulic lines of the clutch from the retaining clips, disconnect the electrical wiring, and unscrew the nuts that secure the clutch pedal to the body. There is no need to disconnect the electrical connectors. Rotate the pedal and lower it to create space, unclip the wiring from the top of the filter housing, remove the cover, and extract the filter. Vacuum any dust and debris from the housing, insert the new filter ensuring the orientation of the arrows is correct, reattach the pedal by hand-tightening the screws and then tightening them to 21 Nm. Reconnect the hydraulic lines of the clutch, and replace the lower dashboard panel and the side panel of the centre tunnel.
Posted on 17 September 2026 by ScegliAuto
Related tutorials
Renault Megane
(2008-2015 /
Megane III, Megane 3)
.. Here’s how to change the cabin filter on the Renault Megane III: the cabin filter (which becomes a pollen filter i.. …
Renault Megane
(2008-2015 /
Megane III, Megane 3)
To change the cabin air filter on a Renault Megane III, access it from the passenger footwell. As seen in the video, there is a black plastic triangl…
Renault Megane
(2008-2015 /
Megane III, Megane 3)
In this video, learn how to change the cabin air filter on the Renault Megane III: to change this filter, you need to remove part of the dashboard, s…
Other guides you may be interested in
|
How to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.097
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |