|
Do it yourself
| |||
| ||||
How to Change the Cabin Filter on a Renault Megane IV
Model: Renault Megane
Megane IV, Megane 4
- Years:
2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
Let's see how to change the cabin filter on a Renault Megane IV: this is hidden in a very awkward spot behind the glove compartment (passenger side), but you do not need to remove the entire dashboard. Follow these steps. Open the glove compartment and empty it, then unclip the damper that holds the compartment open: usually, you press or pull it sideways. Push the side walls of the glove compartment inward to unclip the stop pins; this allows the compartment to lower completely (flipping forward towards the seats). Lower the glove compartment until it opens fully. Locate the cabin filter cover: it is a rectangular black plastic panel, usually near the centre console, under the dashboard. Unclip the cover and pull out the old filter: if it is stuck, pull gently (be careful not to tear it). Clean the housing (with a damp cloth or vacuum) from leaves, dust, and debris. Insert the new filter respecting the orientation (usually the arrows on the filter indicate the airflow direction) then close the filter cover until you hear it click. Reassemble the glove compartment: reposition the side pins, reattach the damper, and close the door.
Posted on 16 June 2026 by ScegliAuto
Related tutorials
Renault Megane
(2008-2015 /
Megane III, Megane 3)
If you intend to change the engine air filter of your Renault Megane third series yourself, simply follow the steps described below one by one. First…
Renault Megane
(2002-2010 /
Megane 2)
In this video tutorial, you will learn how to replace the cabin filter on the second series Renault Megane. First, get inside the vehicle and remove …
Renault Megane
(2015-2023 /
Megane IV, Megane 4)
Today, we will look at the instructions that will allow us to replace the cabin air filter on a Renault Megane in simple steps. First, get inside the…
Other guides you may be interested in
|
How to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.031
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |