Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Why doesn't the remote control of our Renault work anymore?

Model: Renault Renault Various
Part: Key

If the remote control of our Renault has suddenly stopped working, it is very likely that the related battery is now completely discharged and therefore needs to be replaced. This is an extremely simple and quick operation, let's see how to proceed in this tutorial. First of all, we extract the emergency metal key by pressing the appropriate button, then we insert a small screwdriver with a flat tip into the indicated slot, lever and unlock the small rear door. At this point, we can remove the old battery, insert a replacement of type CR2032 and reassemble everything.

Posted on 6 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Renault remote control?
How do you replace the battery of the Renault remote control?
Renault Renault Various In order to replace the battery of the Renault remote control, you need to slide the panel located on the back of the device so that it can be comple…
How do you replace the battery of the Renault remote control?
How do you replace the battery of the Renault remote control?
Renault Renault Various In order to replace the battery of the Renault remote control, you need to remove the key from the bottom of the device: once the old key has been re…
Renault magnetic key not detected and bypassed with a kitchen tool.
Renault magnetic key not detected and bypassed with a kitchen tool.
Renault Renault Various In this video we see how it is possible to bypass a non-functioning magnetic key, with a simple kitchen tool. There is nothing more irritating than t…

Other guides you may be interested in

Oil and Oil Filter Replacement on Suzuki RMZ 250 (2013)

Descriptive guide for replacing the engine oil and oil filter on a 2013 Suzuki RMZ 250. Obtain 1 litre of Suzuki SAE 10W40 oil and a K&N KN-207 oil filter. Position the bike on a central stand. Place a container for oil disposal under the engine. Start the engine and let it warm up, then turn it off. Using a ratchet and a 13mm socket, unscrew the two oil drain plugs located under the engine and let it drain. Using a ratchet and a 10mm socket, unscrew the two screws located on the side of the oil filter cover, on the right side of the engine. Remove the filter cartridge and clean the housing thoroughly. Insert the new filter in the same position as the old one. Screw the cover and the two drain plugs back on. Unscrew the oil filler neck located on the right side of the crankcase and pour in the oil. The manufacturer specifies 950ml for oil only, and 1000ml with filter replacement.

Watch the video!


by ScegliAuto

More videos