Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights of the Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Tail light

In this video we can see how to replace the rear headlight on the Renault Kangoo II; we open the rear door and see that about halfway up the rear pillar, we see a plastic screw. We have to unscrew it and remove it from its seat; we will have to do the same with the screw that is above the wheel arch, from the inside (this screw is shorter than the previous one). Now the headlight unit comes off easily, we hold the wiring connectors with one hand to which the unit containing the bulbs is connected, and change the bulb that is possibly blown, then put everything back in place following the reverse system.

Posted on 12 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Third Brake Light and Replace the Bulbs on a Renault Kangoo
How to Remove the Third Brake Light and Replace the Bulbs on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Below are the instructions for removing and replacing the third brake light and its bulbs on a Renault Kangoo. First, open the rear tailgate of the v…
Replacing the Rear Light Bulbs of the Renault Kangoo
Replacing the Rear Light Bulbs of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today, we will discover the instructions that will allow us to remove and replace the rear light bulbs of the Renault Kangoo. First, open the rear do…
How to replace the rear light bulb of the Renault Kangoo
How to replace the rear light bulb of the Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Today we will explain how to replace the rear headlight bulb of a Renault Kangoo. First, open the rear doors and unscrew the two locking screws by ha…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos