Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Filter on a Renault Scenic

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Cabin air filter

How to replace the cabin filter on a Renault Scenic. Open the door and remove the trim located on the right side of the dashboard. Use a plastic lever to detach the covering on the side of the dashboard. Obtain a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Extract the cabin filter from its housing, insert the new part into the filter housing, and reassemble all components of the glove compartment as they were removed previously.

Updated on 28 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) To replace the cabin filter of the Renault Scenic, open the glove compartment located on the passenger side. Once opened, locate the screws that secu…
Renault Scenic (1993-2003 / Scenic 1, MK 1, RX4) In this tutorial, you will see how to replace the cabin filter in a Renault Scenic RX4 by following some simple steps: first, purchase a quality cabi…
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) In this tutorial, you will see how to replace the cabin filter on the Renault Scenic, a very simple and quick operation to perform annually along wit…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos