Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the fuel pump of a Renault Scenic?

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Fuel pump

To replace the fuel pump on a Renault Scenic, you will need to access the trunk. The fuel pump is located under the spare wheel, so you will need to remove the spare wheel to access the pump. Once you have removed the spare wheel, you will be able to see the fuel pump and its housing. Make sure to disconnect the car battery before proceeding with the fuel pump replacement. Next, you will need to unscrew the bolts securing the fuel pump housing and disconnect the fuel lines and electrical connectors. Once the fastenings have been removed and the lines and connectors disconnected, you can extract the entire fuel pump unit. Then, replace the pump unit with a new one, making sure to install it correctly following the same process in reverse. Finally, tighten the bolts, reconnect the fuel lines and electrical connectors, reinstall the spare wheel, and reconnect the car battery. Make sure to carefully check that everything is securely fastened before starting the vehicle.

Posted on 3 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Scenic (2003-2009 / MK 2, Scenic 2) To replace the fuel pump in a Renault Scenic, completely remove the rear seats to access their underside. Here, lifting the carpet will reveal a circ…
Renault Scenic (2003-2009 / MK 2, Scenic 2) Let’s see how to remove the high-pressure fuel pump mounted on a Renault Scenic. Disconnect the battery cables, then remove the rear seat cushions of…
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) Today, in this brief guide, learn the procedure to remove and replace the diesel filter of the Renault Grand Scenic. First, lift the vehicle and star…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos