Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Renault Scenic

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Tail light bulb

To replace the rear headlight bulb of the Renault Scenic, it is necessary to remove the headlight from its housing. Let's then unscrew the screws on the outer side of the headlight to remove it. Disconnect the connector from the headlight, once removed, and open the cap on the dome light to proceed with the replacement of the bulb. Replace the bulbs inside, keeping the same wattage. Close the dome light cap and connect the headlight to the connector. Insert the headlight into its housing and secure it with the side screws. Repeat the same steps on the right headlight and finally close the trunk.

Posted on 30 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Renault Scenic 2
How to replace the rear headlight bulb of the Renault Scenic 2
Renault Scenic (2003-2009 / MK 2, Scenic 2) .. Today we will explain how to replace the rear headlight bulb of the Renault Scenic 2. To perform this simple and quick operation.. …
How to Replace the Front Headlamp Bulb on a Renault Scenic
How to Replace the Front Headlamp Bulb on a Renault Scenic
Renault Scenic (1996-2003 / ) Before starting, open the bonnet of your Renault Scenic. First, unclip and remove the rear cover of the blown bulb. Next, unclip the clip that secure…
How to replace the rear headlight bulb of the Renault Scenic 2
How to replace the rear headlight bulb of the Renault Scenic 2
Renault Scenic (2003-2009 / MK 2, Scenic 2) If you own a Renault Scenic Mk2 and are wondering how to replace the rear headlight bulb, then all you have to do is read the following guide and fol…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos