Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the factory radio of the Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Car stereo

If you own a Renault Clio and want to disassemble the factory radio by yourself, just follow the following procedure. Before starting, remember that the car must remain completely off during the entire operation to eliminate any potential risk to your safety. Go inside the car and remove the plastic cover around the radio with your hands. Then, take a cross-head screwdriver and unscrew all the screws to free the radio. Finally, pull it towards you and disconnect the electrical cable.

Posted on 30 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Install a 2-Din Car Radio in the Renault Clio
How to Install a 2-Din Car Radio in the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this guide, learn how to disassemble and replace the standard car radio with a 2-Din unit in the Renault Clio, following the instructions below. F…
How to Remove the Radio from a Renault Clio
How to Remove the Radio from a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) How do you remove the original radio from a Renault Clio? Follow this guide carefully. Use the original metal keys (aftermarket) to detach the car st…
How do you remove the car radio in the Renault Clio 4?
How do you remove the car radio in the Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) More and more often, there is a desire among owners of an older car to purchase a technologically up-to-date aftermarket car radio and replace the fa…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos