Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the gear shift knob in the Renault Clio?

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Transmission

See other generations:
Video tutorial

The series used in the video here is the Renault Clio 4, although in practice there are no differences with the other series produced. The need to change the gear knob can arise for various reasons, wear, breakage, aesthetic customization and so on, so using this video guide, it is possible to carry out this work with extreme ease.

It is simply a matter of rotating forcefully in a clockwise and counterclockwise direction and pulling the knob itself, as its installation is done by interlocking. After removal, lubricate the plastic shift rod and insert the new knob by pushing it in.


Posted on 11 March 2025 by ScegliAuto


Related tutorials

How to Remove the Gear Knob of a Renault Clio
How to Remove the Gear Knob of a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Before you begin, sit in the driver's seat of your Renault Clio. Start by prising off and lifting the lower section of the gear lever gaiter. Next, g…
How to change the gear knob on the Renault Clio 2
How to change the gear knob on the Renault Clio 2
Renault Clio (1998-2005 / MK 2, Clio 2) Today, in this video tutorial, you will see how to remove and replace the gear knob on the second series Renault Clio in simple steps. First, get ins…
How to replace the gear knob of the Renault Clio
How to replace the gear knob of the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today's instructions will allow us to disassemble and replace the gear lever knob of the Renault Clio. First, we get into the car and start by discon…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos