Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front door panel of the Renault Laguna

Model: Renault Laguna MK 2, X74, Laguna 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Door trim panel

See other generations:
Video tutorial

In a few simple steps, we will see the steps that will allow us to disassemble and remove the front door panel of the Renault Laguna. First, open the front door of the car and start by removing the screw found on the opening handle, using a T30 torx key; unscrew the additional screws of the panel, found on the sides, using a T20 torx key. At this point, remove the window switch panel and disconnect the electrical connectors found underneath; lever on the sides of the panel to detach and remove it, disconnecting the handle cable.


Posted on 29 March 2025 by ScegliAuto


Related tutorials

Removing the Door Panel on a Renault Laguna
Removing the Door Panel on a Renault Laguna
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) To remove the door panel on a Renault Laguna, unscrew the screws located in the area of the upper door opening lever, then remove the plastic cover f…
How to Remove the Door Panel of the Renault Laguna
How to Remove the Door Panel of the Renault Laguna
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) Follow this brief and simple guide for instructions on how to remove and replace the front door panel of the Renault Laguna. First, open the front do…
How to disassemble the internal door handle of the Renault Laguna
How to disassemble the internal door handle of the Renault Laguna
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) Let's see the instructions that will allow us to disassemble and replace the internal handle of the front door of the Renault Laguna. First, we open …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos