Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Renault Kangoo?

Model: Renault Kangoo MK 1, KC, KW - Years 1997-2008
Part: Service warning light

It will be possible to reset the Service light of the Renault Kangoo by turning on the instrument panel, inserting the appropriate key into the ignition switch: once the ignition switch is activated, it will be possible to hold down the button located on the side of the instrument panel. In this way, the Service light will start flashing and it will be possible to continue holding down the button; this will reset the light and it will be possible to release the button. It will be possible to verify that the reset has occurred by turning off and on the instrument panel.

Posted on 17 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Renault Kangoo?
How to reset the Service light on the Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) To reset the Service light on the Renault Kangoo, insert the ignition key into the ignition switch so that you can turn it to power on the instrument…
How to Reset the Service Light on a Renault Kangoo?
How to Reset the Service Light on a Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) Here’s how to reset the Service light on a Renault Kangoo, noting that the method shown in this video is also valid for other Renault cars. The light…
How to reset the Service light on the Renault Kangoo?
How to reset the Service light on the Renault Kangoo?
Renault Kangoo (1997-2008 / MK 1, KC, KW) To reset the Service light on the Renault Kangoo, turn on the instrument panel by rotating the key in the ignition switch: once it is on, press and h…

    Frequently Asked Questions

    • Kangoo 2007-2021 - Why does the Renault Kangoo service light come on? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos