Do it yourself
Frequently asked questions about cars and motorcycles

What to do if the front hood of the Renault Megane II does not open

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Checks and maintenance

In this video we can see how to behave if the front hood of the Renault Megane II no longer opens: in fact, the lever no longer releases the hood latch. The YouTuber is therefore forced to enter under the car, at the front, equipped with a flashlight and a screwdriver, to release the spring and open the hood from the bottom. In this way, he had the opportunity to realize that the cable was not broken, but had come out of the guide, so that the lever no longer acts on it. From the top of the hood, he then reinserted the cable into the lock, ensuring that the ball - which serves to keep the cable in place - returned to its housing. And it was useful. It works.

Posted on 21 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2002-2010 / Megane 2) In the Renault Megane, it may happen that the boot lid won't open, for example, due to a fault with the control button or the lock actuator. In these…
Renault Megane (2002-2010 / Megane 2) In this video, we see how to open the hood of a Renault Megane II that cannot be opened from the inside of the car. We remove the front right grille …
Renault Megane (2015-2023 / Megane 4, Megane IV) If the engine of your Renault Megane Mk4 is overheating unusually due to an old air filter, you need to replace it as soon as possible. Below, we wil…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the internal temperature sensor located in the Renault Megane? Read answer
    • Megane 2008-2015 - What does the Renault Megane "Risk of engine failure" label mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos