Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove and clean the EGR valve on the Renault Kadjar

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: EGR valve

In this video we can see how to disassemble and clean the EGR valve on the Renault Kadjar: we start by opening the hood and removing the engine cover, then we release the intake pipe, removing the components found above it, then we remove it from its housing and protect the holes with paper, to prevent dirt from entering the duct. Now we unscrew the EGR and disconnect the connector. We remove the valve and also protect the remaining hole with paper. Now we will clean the valve on the bench with WD-40 and an old brush; for tougher deposits we can use a screwdriver. When it is clean, we put it back in place, removing the protections, reconnecting the connector and then putting back the intake pipe and the engine cover.

Posted on 21 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located in the Renault Kadjar?
Where is the OBD port located in the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) If you want to find the OBD port inside your Renault Kadjar, all you have to do is carefully read the procedure described below and apply it step by …
How to Remove the Gear Knob on a Renault Kadjar
How to Remove the Gear Knob on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Before you begin, sit in the driver's seat of your Renault Kadjar. Start by prising off and removing the upper section of the gear knob, then repeat …
Where is the internal fuse box of the Renault Kadjar located?
Where is the internal fuse box of the Renault Kadjar located?
Renault Kadjar (2015-2022 / MK 1) In the following guide you will find the description of all the steps you need to follow to quickly find the internal fuse box of your Renault Kadjar…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos