|
Do it yourself
| |||
| ||||
How to remove the cover panel that covers the radio on the Renault Laguna II
Model: Renault Laguna
MK 2, Laguna 2, X74
- Years 2001-2007
In this video we can see how to remove the cover that covers the radio compartment of the Renault Laguna II: the cover is held by two sliding hinges, and the easiest thing to do is to detach them from the front of the cover, gently but also firmly, as shown by the youtuber. Once the sliding hinges are detached, lift the cover again and you will see that at the base of the cover there are two more hinges, which we will unlock by pulling them first to the left and then to the right. The movements must be gentle, to remove the hinges from the shaped profiles. To put it back in place, if the mechanism has retracted too far inside, pull it out with copper wires, so as not to damage it. Proceed in reverse: insert the cover from right to left, always gently, then reattach the sliding hinges, and you're done!
Posted on 30 June 2025 by ScegliAuto
Video tutorial
Related tutorials
Renault Laguna
(2007-2015 /
MK 3, Laguna III, MK III, X91, Laguna 3)
Below we will see the instructions that will allow us to disassemble and replace the original car radio of the Renault Laguna, in simple steps. First…
Renault Laguna
(2001-2007 /
MK 2, Laguna 2, X74)
This guide provides instructions to remove and replace the standard radio in a Renault Laguna. First, get inside the cabin and start removing the sta…
Renault Laguna
(2007-2015 /
MK 3, Laguna III, MK III, X91, Laguna 3)
In this brief and simple guide, you will learn how to remove and replace the original radio of the Renault Laguna by following the instructions below…
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.225
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |