Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the cabin air filter of the Renault Twingo III

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2024
Part: Cabin air filter

Let's see how to change the cabin air filter of the Renault Twingo III: we need to remove the carpeted partition located in the upper part of the passenger footwell (or on the right side). It is easily removed by unscrewing the two butterfly screws that hold the component in place at the top. Once we have removed this cover, we can easily access the cabin air filter cover. Let's remove it and extract the filter. Clean the dust and residue from the compartment before placing the new and clean filter in its place: pay attention to the direction of the arrows to make sure it is placed correctly. Close the cover and the partition that we had previously removed, and the job is done.

Posted on 12 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Cabin Air Filter in a Renault Twingo
How to Change the Cabin Air Filter in a Renault Twingo
Renault Twingo (2014-2024 / Twingo 3, Twingo III) To change the cabin air filter in a third-generation Renault Twingo, fully slide the passenger seat back and lower the backrest to work with more spa…
How to replace the cabin air filter of the Renault Twingo 3
How to replace the cabin air filter of the Renault Twingo 3
Renault Twingo (2014-2024 / Twingo 3, Twingo III) If you want to replace the cabin air filter in your third generation Renault Twingo by yourself, all you have to do is follow the steps described. Fi…
How to replace the cabin air filter of the Renault Twingo 3
How to replace the cabin air filter of the Renault Twingo 3
Renault Twingo (2014-2024 / Twingo 3, Twingo III) In this new guide of ours, we will discover the necessary steps that you must follow to complete the replacement of the cabin air filter of your Rena…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos