Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you change the rear taillight bulb in the Renault Clio 3?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Tail light bulb

The protagonist of the video available here says that there is nothing difficult in carrying out the work mentioned. We follow the replacement procedure: After opening the rear hatch, unscrew the three torx screws locking the light assembly, grab it and pull to detach it from the bodywork. At this point, remove the stops and release the plastic rear lamp holder base from the light, reaching the bulbs. Now all that remains is to complete the work by removing one or more bulbs that you want to change, testing the ignition, and reassembling everything.

Posted on 16 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on the Renault Clio 3?
How to Replace the Rear Light Bulb on the Renault Clio 3?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To replace the rear light bulb on the Renault Clio 3, open the tailgate of the boot and loosen the screws found between the seal and the light. This …
How to disassemble the rear fog light of the Renault Clio.
How to disassemble the rear fog light of the Renault Clio.
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Today we will discover the instructions that will allow us to disassemble and replace the rear fog light and its bulb on the Renault Clio. First, let…
How to replace the rear headlight bulb of the Renault Clio 4
How to replace the rear headlight bulb of the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The steps to replace the rear headlight bulb of the Renault Clio 4 are: -open the trunk; -remove the side cover, located on the trunk cover; -unscrew…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos