Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the cabin fan of the Renault Laguna

Model: Renault Laguna MK 2, X74, Laguna 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Blower motor

See other generations:
Video tutorial

In this short guide we will see the instructions that will allow us to disassemble and replace the cabin fan of the Renault Laguna. First of all, we get on board the cabin, on the passenger side, and start by removing the side plastic cover that we find at the bottom, thus accessing the cabin fan; then we unscrew the fixing screws and release the plastic clips, disconnecting the electrical connector to remove it from the cabin, as shown in the video.

At this point we replace the cabin fan with the new one, as well as with the original one, reassembling everything!


Posted on 4 August 2025 by ScegliAuto


Related tutorials

How to Remove the Cabin Fan of the Renault Laguna
How to Remove the Cabin Fan of the Renault Laguna
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) In today's tutorial, we will see the instructions to remove and replace the cabin or air conditioning fan of the Renault Laguna. First, get inside th…
How to Replace the Cabin Fan in a Renault Laguna
How to Replace the Cabin Fan in a Renault Laguna
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) To replace the cabin fan in a Renault Laguna, open the glove compartment located on the passenger side and loosen the screws found inside and on the …
How to Replace the Cabin Fan Resistor on a Renault Laguna?
How to Replace the Cabin Fan Resistor on a Renault Laguna?
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) To replace the cabin fan resistor on a Renault Laguna, access the interior of the dashboard located directly beneath the glove compartment on the pas…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos