Do it yourself
Frequently asked questions about cars and motorcycles

Where are the fuses located in the Renault Clio 4?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Fuse box

Every fuse installed on board the Renault Clio 4 is responsible for regulating the operation of a device installed on the vehicle. In this car category, there are two fuses: one will be located in the engine compartment, immediately under the windshield on the driver's side, and the second will be behind the cover located inside the cabin, at the bottom left of the steering column. The first one contains the fuses for the dipped headlights, alternator, windshield wipers, etc. The second one contains the fuses for the interior lights, instrument cluster, air conditioning, etc.

Posted on 19 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) The fuses for the Renault Clio 5 are located inside designated fuse boxes within the vehicle. The first is situated in the engine compartment: to acc…
Renault Clio (2019-2026 / Clio V, Clio 5) The fuse boxes located inside the Renault Clio contain the fuses responsible for the operation of the devices mounted on the car. The first box is lo…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The fuses on a Renault Clio 3 are located in two fuse boxes installed within the vehicle. This model has two boxes for housing the fuses. The first i…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - Where is the horn relay on the Renault Clio IV located? Read answer
    • Clio 2012-2019 - Where is the fuel pump fuse on Renault Clio? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos