Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Window Switch Button on Renault Twingo

Model: Renault Twingo Twingo 1 - Years 1993-2007
Part: Power window switch

How to remove the window switch button located in the driver’s door panel of a Renault Twingo? This guide explains the procedure; before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a plastic or metal lever to pry between the button and the door handle. Once the button is extracted from the handle, press the two plastic clips on it and disconnect the power cable. Finally, remove the door panel to carry out maintenance.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the window lifter mechanism and the side window of the Renault Twingo
Disassembly of the window lifter mechanism and the side window of the Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Today we will see, in this video tutorial, how to remove and replace the side window and the window mechanism of the Renault Twingo, following the in…
Passenger airbag deactivation
Passenger airbag deactivation
Renault Twingo (2014-2024 / Twingo 3, Twingo III) Deactivating the passenger airbag is practically the same procedure on all modern cars. We, as an example, show you a Renault Twingo. The operation m…
How to replace the light switch lever on a Renault Twingo
How to replace the light switch lever on a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Before we can begin, we will have to go and sit in the driver's seat of our Renault Twingo. So let's start by disassembling and removing the steering…

Other guides you may be interested in

How to Replace the Timing Belt on a Lancia Delta

How do you replace the timing belt on a Lancia Delta? Lift the car on a column lift. Open the bonnet, remove the engine soundproofing panel and the metal timing belt cover. Using a suitable spanner, loosen the tensioner pulley and slide the belt off its seat. After fitting the new belt, use the spanner to tension the tensioner pulley, tightening until the belt has the correct tension (as previously installed). Finally, check the tensioner and the belt itself, and tighten everything with a socket wrench.

Watch the video!


by ScegliAuto

More videos