Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How to remove the front arm bushing of a Renault Clio

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Bushings
Operation: How to remove the front arm bushing of a Renault Clio

Let's see how to remove the front arm bushing of a Renault Clio. First of all we put the car on a bridge: we raise the car to a preferred height and unscrew the locking pins of the metal bar with a socket wrench (as in the video). We remove the bushing from the seat; We always compare the parts to be replaced with new ones, if they are suitable, we can assemble them. Now we begin the assembly of the new piece: we mntiamo the new bushing, we tighten all the bolts on the threads shown. We double check that we have tightened everything well, we mount the metal bar to finish the job.


Posted on 9 November 2023 by ScegliAuto



Replacement of anti-roll bar bushing
Renault Clio (1998-2005 / Clio 2, MK 2) If you hear some noise coming from the front end and the road holding seems to have worsened, it is likely that some bushings supporting the suspensi
Replacement front swing arm Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) In this video guide we will see how to remove and replace the swing arm of the Renault Clio 2 suspension. First of all, we lift the car from the grou
Replacing the front arm of a Renault Clio 1.2
Renault Clio (1998-2005 / Clio 2, MK 2) Let's see the disassembly of the arm of a Renault Clio. We put the car on a column bridge and loosen the wheel pins with a telescopic wrench and slid

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos