Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the armrest of the Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019

See other generations:
Video tutorial

Today we will see the instructions that will allow us to disassemble and replace the armrest of the driver's front seat of the Renault Clio, in simple steps. First, we get on board the car and start rotating our armrest, rotating it upwards and pulling outwards at the same time; in this way we will permanently remove the armrest from the seat, as shown in the video.

At this point, we carry out the repair or replacement of the entire armrest, fixing it correctly on the front seat; then make sure it is functioning correctly.


Posted on 11 September 2025 by ScegliAuto


Related tutorials

How to Install a Custom Armrest for Renault Clio V
How to Install a Custom Armrest for Renault Clio V
Renault Clio (2019-2026 / Clio V, Clio 5) In this video, see how easy it is to install this highly customisable armrest for the Renault Clio V, available on the website braccioli-italy-armres…
How to Install the Front Armrest on a Renault Clio V?
How to Install the Front Armrest on a Renault Clio V?
Renault Clio (2019-2026 / Clio V, Clio 5) Let's see how to install the front central armrest on a Renault Clio V: you can find the armrest on Amazon with code B014245ML6 for £40.28, delivered…
Guide to disassembling the ECU of the Renault Clio 1.2
Guide to disassembling the ECU of the Renault Clio 1.2
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this guide, we will discover the steps that will show us how to disassemble and replace the ECU (Engine Control Unit) of the Renault Clio 1.2. Fir…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos