Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of the Renault Megane 3

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Rear bumper

Today we will explain how to remove the rear bumper of the Renault Megane 3 car, produced from 2008 to 2017. To perform this simple and quick operation, we need to open the trunk and then remove the tail light. To remove the right and left tail lights, we need to release the internal plastics in the trunk and unscrew the nut. Disconnect the connector and remove the tail light. Remove the plastic clips on both fenders in order to remove them. Unscrew the lower screws of the bumper to remove it, being careful not to damage the plastic clips.

Posted on 29 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper from the Renault Megane
How to Remove the Rear Bumper from the Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) Today, you will discover the steps and instructions for removing and replacing the rear bumper of the Renault Megane. First, open the rear hatch of t…
Removing the Rear Bumper on a Renault Megane
Removing the Rear Bumper on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Is the rear bumper of your Megane damaged? Let's look at removing the bumper. Lift the tailgate and access the sides of the boot to remove the rear l…
How to Remove the Front Bumper on the Renault Megane
How to Remove the Front Bumper on the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Here is the guide necessary to remove and replace the front bumper on the Renault Megane. First, open the bonnet of your car and begin unscrewing all…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos