Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights in the Renault Megane?

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light

See other generations:
Video tutorial

In this tutorial, we can see how to replace the rear lights in the Renault Megane, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work in complete safety, then open the trunk door, locate the cap located in the lower internal area of the headlight in question and remove it. Then unscrew the two plastic nuts, grab the headlight and, pulling it outwards, separate it from the bodywork.

At this point, all that remains is to disconnect the power connector and install the replacement.


Posted on 31 July 2025 by ScegliAuto


Related tutorials

How to remove the tail lights on a Renault Megane?
How to remove the tail lights on a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, we will see how to disassemble the rear lights on a Renault Megane, a very simple and quick operation. First, let's make sure that …
How to Replace the Rear Light Bulbs in a Renault Megane?
How to Replace the Rear Light Bulbs in a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, you will see how to replace the rear light bulbs in a Renault Megane, an extremely simple and quick operation. First, ensure that t…
How to Replace the Rear Light Bulbs on the Renault Megane?
How to Replace the Rear Light Bulbs on the Renault Megane?
Renault Megane (2015-2023 / Megane IV, Megane 4) In this tutorial, we will see how to replace the rear light bulbs on the Renault Megane, an extremely simple and quick operation. First, ensure that …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos