Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulbs in a Renault Megane?

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Tail light bulb

In this tutorial, you will see how to replace the rear light bulbs in a Renault Megane, an extremely simple and quick operation. First, ensure that the key is not inserted. Then, open the boot lid and remove the cover located at the back of the light in question. Next, locate the two plastic securing nuts, unscrew them completely, and pull the light away from the bodywork. At this point, disconnect the power connector, remove the rear base, and replace the faulty bulb.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the rear light and bulbs of the Renault Megane
Disassembly of the rear light and bulbs of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) In a few simple steps, we will see the process of how to disassemble and replace the rear light and its bulbs of the Renault Megane. First, open the …
Replacing the Rear Light Bulbs on a Renault Megane
Replacing the Rear Light Bulbs on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the rear light bulbs on your Renault Megane, follow these steps. Open the boot and use a lever to remove the plastic cover next to the boo…
How to Change the Rear Light Bulbs on a Renault Megane
How to Change the Rear Light Bulbs on a Renault Megane
Renault Megane (2002-2010 / Megane 2) How to change the rear light bulbs on a Renault Megane? Open the boot lid, unscrew the securing screws located at the side of the rear light using a …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos