Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the Renault Megane?

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, we can see how to replace the rear headlight bulbs in the Renault Megane, a very simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely.

Then, open the trunk door, locate the two plastic bolts along the inner edge of the headlight in question and unscrew them. Next, grab the headlight, separate it from the bodywork, and open the internal base.

At this point, all that remains is to replace the faulty bulb and reassemble everything following the reverse procedure.


Posted on 20 November 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs in a Renault Megane?
How to Replace the Rear Light Bulbs in a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, you will see how to replace the rear light bulbs in a Renault Megane, an extremely simple and quick operation. First, ensure that t…
How to replace the rear lights in the Renault Megane?
How to replace the rear lights in the Renault Megane?
Renault Megane (2002-2010 / Megane 2) In this tutorial, we can see how to replace the rear lights in the Renault Megane, an extremely simple and quick operation. First of all, make sure t…
How to Replace the Rear Bulbs on a Renault Megane III
How to Replace the Rear Bulbs on a Renault Megane III
Renault Megane (2008-2015 / Megane III, Megane 3) To access the rear bulbs, open the boot. On the outer side, remove the cover to access the rear lights. From the inside, unscrew the fixing screws of…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos