Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bulbs on a Renault Megane III

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light

See other generations:
Video tutorial

To access the rear bulbs, open the boot. On the outer side, remove the cover to access the rear lights.

From the inside, unscrew the fixing screws of the light cluster, then pull the light unit out from the outside. Be careful with the bulbs, as they are pressurised.

Disconnect the bulb holder, leaving it hanging by its wire, without needing to remove the connector. Replace the bulb, remembering that new bulbs should never be touched with bare hands, or their lifespan will be significantly reduced.

Reconnect the bulb holder, securing it in place while being careful with the wiring. Reinsert the screws and covers.

Operation completed.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs in a Renault Megane?
How to Replace the Rear Light Bulbs in a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, you will see how to replace the rear light bulbs in a Renault Megane, an extremely simple and quick operation. First, ensure that t…
How to replace the rear light bulbs on a Renault Megane Grand Tourer?
How to replace the rear light bulbs on a Renault Megane Grand Tourer?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, see how to replace the rear light bulbs on a Renault Megane Grand Tourer, a very simple and quick operation. First, ensure the key …
How to Remove the Rear Lights from the Tailgate on the Renault Megane?
How to Remove the Rear Lights from the Tailgate on the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, you will see how to remove the rear lights from the tailgate on the Renault Megane, a very simple operation, allowing you to replac…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos