Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to remove the rear lights from the tailgate in the Renault Megane?

Renault Megane - Video tutorial

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Tail light
Operation: How to remove the rear lights from the tailgate in the Renault Megane?

In this tutorial, we can see how to remove the rear lights of the tailgate in the Renault Megane, a very simple operation, in order to replace the bulbs or the entire unit. First of all, make sure the key is not inserted, then open the trunk and remove the small plastic door located right on the back of the light to be removed. Then unscrew the two screws indicated with a Torx T20 screwdriver, grip the light and separate it from the tailgate by pulling it outward. To remove a bulb, simply rotate it slightly counterclockwise.


Posted on 17 July 2023 by ScegliAuto



Removing the rear bumper Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Is the rear bumper of the Megane damaged? Let's see the disassembly of the bumper. We lift the tailgate and access the sides of the trunk to remove t
How to change the rear light on Renault Megane
Renault Megane (2002-2010 / Megane 2) In this guide, let's see how to disassemble and replace the rear light of the Renault Megane, in simple and quick steps. First of all, we open the ta
How to replace the rear light bulbs in Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial we can see how to replace the rear light bulbs in your Renault Megane, an extremely simple and fast operation. First of all make sur

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos