Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the armrest of the Renault Trafic

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

See other generations:
Video tutorial

In this short guide, we will see the instructions that will allow us to disassemble and replace the armrest of the Renault Trafic, but also of the Opel Vivaro. First, we get on board the vehicle and start by removing the armrest knob that we find on the lower part; then we detach the armrest from the holding bracket, in order to remove it, as shown in the video.

At this point, we carry out the repair or replacement of the armrest with the new one; we correctly fix it on the bracket and screw the knob on it, thus completing the replacement operation.


Posted on 11 October 2025 by ScegliAuto


Related tutorials

How to repair the armrest of the Renault Trafic
How to repair the armrest of the Renault Trafic
Renault Trafic (2001-2014 / MK 2) In this guide we will see the main instructions that will allow us to repair the driver's armrest of the Renault Trafic, but also of the Opel Vivaro.…
How to Replace the Seat Armrest on the Renault Trafic?
How to Replace the Seat Armrest on the Renault Trafic?
Renault Trafic (2001-2014 / MK 2) To replace the seat armrest on the Renault Trafic, first remove the plastic cover located on the pivot that allows you to adjust the angle of the arm…
How to replace the seat armrest in the Renault Trafic?
How to replace the seat armrest in the Renault Trafic?
Renault Trafic (2001-2014 / MK 2) To replace the seat armrest in the Renault Trafic, detach the cover above the pivot that allows the armrest to be raised and lowered. Once this panel…

    Frequently Asked Questions

    • Trafic 2014-2027 - Where is the starter motor located on the 2015 Renault Trafic? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos