Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front door panel of the Renault Scenic

Model: Renault Scenic Scenic 3, MK 3, MK III, Scenic III - Years 2009-2015
Part: Door trim panel

Today's steps will allow us to disassemble the front door panel of the Renault Scenic. First, we open the front door of the car and start unscrewing the fixing screws of the door panel, located on the sides and on the handle; we also remove the window switch panel, disconnecting the electrical connector underneath, as shown in the video. At this point, we pry on the sides of the panel to detach it and remove it, disconnecting the handle cable; we apply the opposite procedure for reassembly!

Posted on 31 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the door panel of the Renault Scenic
Disassembly of the door panel of the Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) In simple and short steps, we will see how to disassemble and replace the front door panel of the Renault Scenic. First of all, open the front door o…
How to Remove the Front Door Panel on a Renault Scenic
How to Remove the Front Door Panel on a Renault Scenic
Renault Scenic (2016-2022 / MK IV, Scenic 4, MK 4, Scenic IV) Today, you will discover the necessary instructions to remove and detach the front door panel of a Renault Scenic. First, open the front door and sta…
Removing the Door Panel on a Renault Scenic 3
Removing the Door Panel on a Renault Scenic 3
Renault Scenic (2009-2015 / Scenic 3, MK 3, MK III, Scenic III) Let’s see how to remove the front door panel on a third-generation Renault Scenic in simple steps. First, open the front door and use a plastic lever…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos