Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the tire pressure sensor on the Renault Kadjar.

Model: Renault Kadjar MK 1 - Years 2015-2022
Part:

In this guide, we will go over the instructions for disassembling and replacing the tire pressure sensor of the Renault Kadjar. First, we lift the vehicle and start by removing the front wheel; then we remove the tire to access the tire pressure sensor, which we will unscrew using a star wrench, as shown in the video. At this point, we install the new air pressure sensor, reassembling the tire; we perform the sensor registration and calibration, checking its proper functioning and resetting the TPMS warning light from the instrument panel!

Posted on 5 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the internal fuse box of the Renault Kadjar located?
Where is the internal fuse box of the Renault Kadjar located?
Renault Kadjar (2015-2022 / MK 1) In the following guide you will find the description of all the steps you need to follow to quickly find the internal fuse box of your Renault Kadjar…
How to Remove the Gear Knob on a Renault Kadjar
How to Remove the Gear Knob on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) Before you begin, sit in the driver's seat of your Renault Kadjar. Start by prising off and removing the upper section of the gear knob, then repeat …
Where is the OBD port located in the Renault Kadjar?
Where is the OBD port located in the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) If you want to find the OBD port inside your Renault Kadjar, all you have to do is carefully read the procedure described below and apply it step by …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos