Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor of the Renault Clio 1.9D

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Starter motor

Today's information will allow us to remove and replace the starter motor of the Renault Clio 1.9D. First, open the vehicle's bonnet and start by removing the battery, disconnecting both terminals (positive and negative); then unscrew the bolts of the starter motor located at the bottom, subsequently disconnecting the electrical wiring to remove it, as shown in the video. At this point, carry out the repair or replacement of the starter motor with the new one, making the connection and checking the engine's ignition!

Posted on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Starter Motor on Clio
How to Change the Starter Motor on Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Changing the starter motor on a Clio? Replace the starter motor if you are experiencing starting issues. Disconnect the power terminals of the starte…
How do you replace the starter motor of the Renault Clio?
How do you replace the starter motor of the Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To replace the starter motor of the Renault Clio, you need to open the hood to access the components inside the engine compartment: you will also nee…
Replacing the Starter Motor on the Renault Clio 2 1.2 8V
Replacing the Starter Motor on the Renault Clio 2 1.2 8V
Renault Clio (1998-2005 / Clio 2, MK 2) In today's video, we will see the main instructions that will allow us to dismantle and replace the starter motor on the Renault Clio 1.2 8V petrol. …

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 1998-2005 - Why doesn't the Renault Clio 2 start? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos