Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on the Renault Clio 2 1.2 8V

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Starter motor

In today's video, we will see the main instructions that will allow us to dismantle and replace the starter motor on the Renault Clio 1.2 8V petrol. First, open the bonnet of your car and locate the starter motor, which is found at the bottom of the engine bay; then disconnect and remove the battery. At this point, unscrew all the fixing screws of the starter motor, then disconnect the electrical connector; now you can remove it and replace it with the new one, applying the reverse procedure of disassembly!

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the starter motor of the Renault Clio 1.5 dCi
How to replace the starter motor of the Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The information provided in this guide will show us the procedure for disassembling and replacing the starter motor of the Renault Clio 1.5 dCi. Firs…
Guide to replacing the starter motor of the Renault Clio
Guide to replacing the starter motor of the Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Today's instructions will show us how to disassemble and replace the starter motor of the Renault Clio. First, we open the engine hood of the car and…
Guide to replacing the starter motor of the Renault Clio
Guide to replacing the starter motor of the Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Today's instructions will show us how to disassemble and replace the starter motor of the Renault Clio, following these simple steps. First, we open …

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 1998-2005 - Why doesn't the Renault Clio 2 start? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos