Do it yourself
Frequently asked questions about cars and motorcycles

Fuse Diagram and Placement for the Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Fuse box

Briefly, we will see the instructions that allow us to access the internal fuse box of the Renault Clio and find the fuse diagram. First, open the driver's side front door and start pulling the plastic cover located at the bottom left of the dashboard to remove it and access the fuse box. Usually, the diagram is found inside the cover, but it can also be found in the vehicle's user and maintenance manual. At this point, replace any blown fuses with new ones, taking into account the amp rating.

Posted on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (1998-2005 / Clio 2, MK 2) In this guide, we will discover information regarding the diagram and positioning of the internal fuse box of the Renault Clio. First, open the drive…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this guide, we will see the information related to the internal fuse scheme and diagram of the Renault Clio. First, we open the front driver's sid…
Renault Clio (1998-2005 / Clio 2, MK 2) This guide shows the positioning and layout of the fuse boxes on the Renault Clio second series. First, locate the internal fuse box, which is found …

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - Where is the horn relay on the Renault Clio IV located? Read answer
    • Clio 2012-2019 - Where is the fuel pump fuse on Renault Clio? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos