Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard of the Renault Kangoo

Model: Renault Kangoo KC, MK 1, KW - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Dashboard

See other generations:
Video tutorial

To remove the dashboard, act as follows. Open the left front door and unscrew the torx screw that secures the dashboard on the side; perform the same operation on the right side.

Use a plastic stick to separate the dashboard from the lower part by levering along the entire joint line until the dashboard is completely detached. At this point, if you need to work on the instrument panel, you can proceed as shown in the video.

Once the work is done, you can put the dashboard back in its original position, ensuring it fits well with the lower part, tighten the two side screws, and you are finished.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Kangoo
How to Reset the Service Light on a Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) Manually resetting the service light on your first-generation Renault Kangoo (1997-2008) is very simple. Follow these steps to complete the operation…
Guide to removing the dashboard and the cabin heater radiator of the Renault Kangoo
Guide to removing the dashboard and the cabin heater radiator of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today's guide will illustrate the steps to remove and replace the dashboard and the cabin heater radiator of the Renault Kangoo. First, get into the …
Replacement of the cabin fan of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today we will discover the instructions that will allow us to disassemble and replace the cabin fan of the Renault Kangoo. First of all, we get on bo…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos